Now imagine that the watch is shaking so much that you can hardly see the precise position of the second hand. Imagine calling out each second as it ticks off using the second hand of a watch. Jitter is the variation in the timing of the sample rate.
When a termination LED is not illuminated at all, the output is either unconnected or not terminated properly, (open circuit or too high of an impedance). Red indicates an output that is shorted or over-terminated (too low of an impedance). A green indicator shows correct 75 Ohm termination. You can see which pieces of gear are internally terminated, and if a cable is connected properly. The ART SyncGen can also double as a system tester by telling you about the status of your BNC word-clock cables and terminations. This allows the SyncGen to work together with a wide variety of digital audio equipment. You can drive either BNC word-clock inputs or coaxial S/PDIF inputs.
#Art word clock generator#
Using a word-clock generator will centralize all of the timing, reducing accumulated timing errors between the individual units that make up a digital recording chain. The ART SyncGen is a simple to use and inexpensive way to improve the sound of your digital recording gear and eliminate seemingly random pops and clicks resulting from synchronization timing errors between different pieces of equipment. LED Indicators Monitor Termination And Operating Status of BNC Outputs.Two Zero Bit Digital Black SPDIF Outputs On Coaxial RCA Connectors.Four High-Current 5 Volt BNC Word-Clock Outputs.Stable and Accurate Time-Base Reference.Professional Headphones for Audio MonitoringĪRT SyncGen Wordclock Sample Rate Generator – (New).
0 kommentar(er)
